PUR flat lamination hot melt adhesive

Flat Laminating Hot Melt Adhesive 60605-16

Specifically used for flat lamination of PVC high-gloss film, leaf granules and other surface materials, aluminum honeycomb panel three-layer composite application, combined with professional PUR flat lamination large panel equipment, a very small coating amount meets high-quality strength requirements. Excellent water resistance, solvent resistance, and heat resistance, the preferred adhesive for cabinet panels and decorative panels. Long open time: after adhesive application, open time up to 1

Product Highlights
PUR flat laminating hot melt adhesive (Polyurethane Reactive), the full Chinese name is moisture-curing reactive polyurethane hot melt adhesive. The main component is an isocyanate-terminated polyurethane prepolymer. The isocyanate groups undergo an irreversible crosslinking reaction upon contact with moisture in the air to form a strong bonding layer, which is an inherent characteristic of PUR adhesive.
Applications
Suitable for PVC, PP, PET, acrylic, CPL, wood veneer, paper, and other materials, in flat lamination processes onto substrates such as solid wood, wood-plastic composite, particleboard, MDF, glass sheet, acrylic, etc.
Product Parameters
Notes

Precautions

1. For future convenience, use a specific mold for positioning during lay-up.

2. The mixing ratio of the adhesive must be precise. The amount of mixed adhesive should not be too large; follow the principle of mixing only what is needed for immediate use.

3. During the bending and pressing process, pay attention to whether the settings of the high-frequency machine are within a reasonable range.

Operation and UseThis product contains isocyanates. Protective gloves suitable for isocyanates should be worn. Wear safety goggles each time the product is used. The curing agent must not come into contact with water or moisture.
CleaningMust be cleaned using I.N.T. Cleaner -- 19430 before the system cures.
Health, Environmental Protection and Safety

Adhesive - Cured adhesive can be disposed of as general non-hazardous waste.

Curing Agent - Contains isocyanates and should be disposed of as hazardous waste.

Mixed adhesive and curing agent - Once fully cured, it can be disposed of as general non-hazardous waste.


Flat Laminating Hot Melt Adhesive 60605-16