Hot-pressed bent wood

Bentwood SAP21300N

Product Highlights
For the production processes, formaldehyde emission requirements and bonding strength standards of different factories, the modified water-based adhesive formula series meets the processing needs of these processes.
Applications
Suitable for hot pressing and high-frequency bending processes of wood structures.
Product Parameters
Adhesive applied: 100-250 g/m²
Pressing pressure: low-density materials 7.0 - 10.0 Kg/cm², medium-density materials 9.0-12.0 Kg/cm², high-density materials 12.0-17.0 Kg/cm²
Shelf life: 9 months, in sealed packaging at 25°C. Store in a clean, cool, dry place at temperatures between 5-30°C in sealed containers. When using, use the oldest stock first.
Notes


Precautions

1. For future convenience, use specific molds for positioning during lay-up.

2. The proportioning of the adhesive must be precise; the amount of mixed adhesive should not be too large, and the principle of mixing only what is immediately needed should be followed.

3. During the bending and pressing process, ensure the settings of the high-frequency machine are within a reasonable range.

Handling and UseThis product contains isocyanates. Protective gloves suitable for isocyanates should be worn. Safety goggles should be worn each time the product is used. The curing agent must not come into contact with water or moisture.
CleaningCleaning must be performed before the system cures.
Health, Environment, and Safety

Adhesive - Cured adhesive can be disposed of as general non-hazardous waste.

Curing Agent - Contains isocyanates and should be disposed of as hazardous waste.

Mixed adhesive and curing agent - Once fully cured, the mixture can be disposed of as general non-hazardous waste.


Bentwood SAP21300N