| 参数 | All raw materials comply with FDA regulation 21CFR175.105 "Adhesives". |
|---|
HM6218
HM6218 is a structural adhesive specifically developed for non-woven fabric products, which is colorless, odorless, and has high adhesion and cohesive strength. All raw materials comply with FDA regulation 21CFR175.105 "Adhesives".
Suggested operating conditions: Suitable for various coating methods such as standard hot melt multi line, spiral spray glue, fiber spray glue, etc.
Suggested operating temperature: 140 º C to 160 º C, depending on other conditions such as machine, substrate, environment, etc.
Storage: It should be stored in a dry and cool place below 40 º C for one year.
Caution: Do not mix with other adhesives. The hot melt adhesive groove must be tightly covered to prevent debris from falling in and affecting the performance of the adhesive. Due to the need to heat hot melt adhesive during use, personal protective equipment must be worn.
HM6317
HM6317 is a rubber band adhesive specifically developed for non-woven products, which is colorless, odorless, and has high adhesion and cohesive strength. All raw materials comply with FDA regulation 21CFR175.105 "Adhesives".
Suggested operating conditions: Suitable for various coating methods such as standard hot melt multi line, spiral spray glue, fiber spray glue, etc.
Suggested operating temperature: 150 º C to 185 º C, depending on other conditions such as machine, substrate, environment, etc.
Storage: It should be stored in a dry and cool place below 40 º C for one year.
Caution: Do not mix with other adhesives. The hot melt adhesive groove must be tightly covered to prevent debris from falling in and affecting the performance of the adhesive. Due to the need to heat hot melt adhesive during use, personal protective equipment must be worn.
