Product Center

IWG·Product Center

Apply PVC film PG105

Product Introduction

PVC adhesive is a polymer resin synthesized by copolymerization of vinyl acetate and polyvinyl alcohol. It has high solid content, good fluidity, and good adhesion to various materials.

Scope of application

Suitable for bonding hard HPC, PVC leather or non-woven fabric materials with MDF, PB and solid wood panels.

Product Specifications

Storage	9 months, in sealed packaging at 25 ℃. Store in a clean, cool, dry place with a temperature between 5-30 ℃ and seal. When using, use the one with the longest storage time first.

Category:Continuous Rolling And Pasting Of Pvc Film

Learn more

Product Details

Good initial adhesion and high bonding strength

PG108 high solid content, cost-effective conventional product, suitable for rolling continuous cold/hot bonding PVC film, with good initial adhesion and high bonding strength.

Apply PVC film PG105

Environmentally friendly products without benzene

PG109 modified benzene free environmentally friendly product, high solid content, suitable for rolling continuous cold/hot bonding PVC film, with good initial adhesion and high bonding strength.

Apply PVC film PG105

Notes	1. Clean both sides of the adhesive to ensure there is no oil stains Dust, etc. 2. Adjust the appropriate coating amount based on the thickness of PVC and the surface effect of the substrate.
Operation usage	This product contains isocyanates, and protective gloves suitable for isocyanates should be worn. Wear goggles every time you use the product. Curing agents must not come into contact with water or moisture.
Clean	Cleaning must be carried out before the system solidifies.
Health, Environmental Protection, and Safety	The cured adhesive can be treated as general harmless waste. Curing agents - containing isocyanates, should be treated as hazardous waste. The mixed adhesive and curing agent can be treated as general harmless waste after complete curing.

FAQ

Apply PVC film PG105 Applicable to which application scenarios?

Suitable for bonding hard HPC, PVC leather or non-woven fabric materials with MDF, PB and solid wood panels.

ChooseContinuous Rolling And Pasting Of Pvc FilmWhat process parameters need to be provided before?

Suggest providing the adhesive material, equipment model, gluing method, wire speed, gluing temperature, opening time, temperature and humidity resistance requirements, and testing standards for technicians to determine the appropriate model and arrange for sample verification.

Continuous Rolling And Pasting Of Pvc FilmHow to choose between hot melt adhesives and other hot melt adhesives?

A comprehensive selection should be made based on the substrate, production efficiency, temperature and humidity resistance requirements, equipment conditions, and cost targets. It is recommended to conduct sample and production line verification before mass use, and use the actual bonding effect as the final basis.

Prev: No More!

Next: No More!

More related products

Product Inquiry