Seal PVC/ABS/CPL wood veneer edge banding, with a sealing line speed of 15m-25m/minute
Good operability, green and environmentally friendly, cost-effective, easy to clean, fine glue line, less pollution, comparable to laser edge sealing.
Suitable for various materials, moisture-proof, mildew proof, and temperature resistant
Long active period, suitable for open devices; Eliminate traditional edge banding quality after-sales issues.
High initial adhesion:2mm PVC edge banding does not rebound
Moisture and temperature resistance:According to different materials, the product can withstand temperatures up to 150 ℃ after curing, and can also withstand low temperatures, with long-term quality stability in high humidity environments
Long active period:Fully meet the use of open devices and ensure stable adhesive application
The glue line is extremely thin:Comparable to laser edge sealing effect, greatly improving product aesthetics
Widely applicable materials:Widely applicable to PVC, acrylic PET、 Bonding of edge banding strips made of aluminum alloy and other materials to substrates
Good operability:Low operating temperature requirements, effective control of energy consumption, excellent workability, controllable production speed of 10-80 meters/minute under different conditions
Easy to clean:Save cleaning processes and costs, maintain high-quality appearance of products
Green and environmentally friendly:Without adding formaldehyde, it can meet the Japanese F * * * * and CARB PII standards
Notes | For convenience in the future, specific molds should be used for positioning during billet assembly. 2. The ratio of adhesive should be precise, and the amount of adhesive should not be too large. The principle of on-demand use should be followed. 3. During the bending and pressing process, pay attention to whether the setting of the high-frequency machine is within a reasonable range. |
| Operation usage | This product contains isocyanates, and protective gloves suitable for isocyanates should be worn. Wear goggles every time you use the product. Curing agents must not come into contact with water or moisture. |
| Clean | Before the system solidifies, it must be cleaned with IWG resistant cleaning agent 19430. |
| Health, Environmental Protection, and Safety | The cured adhesive can be treated as general harmless waste. Curing agents - containing isocyanates, should be treated as hazardous waste. The mixed adhesive and curing agent can be treated as general harmless waste after complete curing. |
