Specially designed for flat PVC high gloss film, leaf particles and other surface materials, three-layer composite application of aluminum honeycomb board
Cooperate with professional PUR flat panel equipment application
A small amount of fabric coating can meet the requirements of high-quality strength
Excellent water resistance, solvent resistance, and heat resistance, preferred adhesive for cabinet and decorative panels
Long opening hours:After gluing, the development time can reach up to 150 seconds, which can meet most assembly processes
High initial adhesion:Excellent initial adhesion, perfectly ensuring that the substrate does not rebound after bonding
Good stability:After complete curing, the heat-resistant temperature can reach up to 140 ℃, suitable for composite bonding with heat-resistant requirements
Long active period:During production, the active period of up to 60 minutes can be maintained on the glue roller to ensure stable glue application
Strong universality:Perfect for various common substrates, with excellent adhesion strength
High gloss performance:The adhesive surface has excellent high gloss effect
Green and environmentally friendly:Without adding formaldehyde, it can meet the F * * * * grade and CARB PII standards
Notes | For convenience in the future, specific molds should be used for positioning during billet assembly. 2. The ratio of adhesive should be precise, and the amount of adhesive should not be too large. The principle of on-demand use should be followed. 3. During the bending and pressing process, pay attention to whether the setting of the high-frequency machine is within a reasonable range. |
| Operation usage | This product contains isocyanates, and protective gloves suitable for isocyanates should be worn. Wear goggles every time you use the product. Curing agents must not come into contact with water or moisture. |
| Clean | Before the system solidifies, it must be cleaned with IWG resistant cleaning agent 19430. |
| Health, Environmental Protection, and Safety | The cured adhesive can be treated as general harmless waste. Curing agents - containing isocyanates, should be treated as hazardous waste. The mixed adhesive and curing agent can be treated as general harmless waste after complete curing. |
